topnav.gif
 
   
   
 
 

 

TCPTC-BBU SERIES

 
Other Products

 

 

PORTABLE DC UPS
WITH TRANSIT CASE

- SEVERE ENVIRONMENT DC UPS
- SINGLE OUTPUT DC UPS
- BATTERY BACK-UP POWER SUPPLY
- CUSTOM DC UPS POWER SYSTEM

 




 

The TCPTC-BBU portable DC UPS Series satisfies an emerging market where critical continuous power is required. Designed as a complete system with power supply, charger and on board batteries, loaded with standard features the TCPTC-BBU Series Portable DC UPS with transit case is ideal for portable, harsh environment indoor or outdoor applications.



400 WATTS POWER SUPPLY
600 WATTS POWER SUPPLY
1000 WATTS
Model
Output
Model
Output
Model
Output
TCPTC-12/34-BBU
12V@34A
TCPTC-12/50-BBU
12V@50A
Consult Factory
TCPTC-24/37-BBU
24V@17A
TCPTC-24/25-BBU
24V@25A
TCPTC-24/41-BBU
24V@41A
TCPTC-48/8-BBU
48V@8A
TCPTC-48-12-BBU
48V@12A
TCPTC-48/20-BBU
24V@25A
400 WATTS BACK-UP FOR 1/2 HOUR
400 WATTS BACK-UP FOR 20 MIN
1000 WATTS BACK-UP FOR 5 MIN

Note: Separate power supply racks and draws are available for increased power levels and back up times. Other voltages and currents are available, contact the factory for details.



OPTION DESIGNATION SUFFIX CODE
LOW VOLTAGE BATTERY DISCONNECT
The LVBD module adds a new dimension to battery backup power supplies. The power supply simultaneously charges the battery and powers the load. If the AC power fails the battery continues to support the load. However, when the battery voltage drops below a predetermined level, the LVBD module disconnects the battery from the load, thereby protecting the battery from the damaging effects of complete discharge.
AUTO LINE SELECT -ALS
POWER FACTOR CORRECTION -PFC
REDUNDANT OPERATION -ORD
FORCED CURRENT SHARING -FCS
RUGGED/MILITARIZED -MIL
HOT PLUGABBLE -HSP
MS CONNECTOR -MSC
WIDE TEMP OPERATION -WTD


  • Mounted in a portable transit case
  • Rugged construction
  • OV/OL/OT Protected
  • Built-In On Board batteries
  • Input and battery circuit breakers
  • Voltage & Current Meters
  • Visual and electronic signals
  • Low voltage battery disconnect

  • Redundant Operation (N+1)
  • Forced Current Sharing
  • Wide temperature range
  • Auto line selection
  • Power Factor Correction
  • Rugged for shoc and vibration
  • 400 Hz Operation
 



ELECTRICAL:

AC Input Voltage : 90-132/180-264 VAC Standard, Auto-Line Selection optional.
AC Input Frequency: 47-63Hz Standard, 47-400Hz optional
Regulation: Line ± .3%
Load + 2%
Ripple: 1% peak to peak, not to
exceed 100mVpp
Efficiency: 85% typical
Output voltage adj: +10% on main output
Overvoltage Protection: Set at 120% of main output, automatic recovery
Overload Protection: Current limiting, automatic recovery




Operating Temperature:
0°C to + 50°C standard
-40°C to 60°C optional
Storage Temperature: -40°C to 85°C
Cooling: Internal ball bearing DC fan
Safety: meets UL 1950, CSA 1402 A
EMI: meets FCC Class A
Humidity: 90% non condensing
Size: 10" (H) x 22.5" (W) x 22.75" (D)
Weight: Approx: 25lbs (depending on battery type & size)

 
 

 

Technology Dynamics