| |
|
|
AC -
DC POWER SUPPLIES
|
 |
SINGLE
OUTPUT, pOWER FACTOR CORRECTED
1500 WATTS
|
APPLICATIONS
The TDRP series of Power Factor Corrected AC-DC power supplies provides highly regulated output power to 1500 watts. Rugged construction and superior quality make this power supply ideal for harsh environment applications. Available in standard, modified or fully custom configurations, for industrial, commercial, COTS, ruggedized and Military applications. .
STANDARD FEATURES:
|
|
|
|
 |
| |
|
• Universal AC Input (100-240 VAC)
|
|
• AC & DC Good Signals |
| • Current Share Function |
• Remote on/off & Remote Sense Functions
|
| • Built In DC Fan for Cooling |
• 12V / 100mA Auxiliary Output |
| • Active PFC for EN61000-3-2 Class D Compliance |
• High Efficiency ZV Technology |
SINGLE
OUTPUT POWER SUPPLIES
| TDSP-1500-5 |
5Volts |
240Amps |
| TDSP-1500-12 |
12Volts |
125Amps |
TDSP-1500-15 |
15Volts |
100Amps |
| TDSP-1500-24 |
24Volts |
63Amps |
| TDSP-1500-28 |
28Volts |
56Amps |
TDSP-1500-48 |
48Volts |
32Amps |
| PARALLEL OPERATION |
-PAR |
| REDUNDANT OPERATION (N+1) |
-ORD |
| HOT SWAP |
-HSP |
| RACK MOUNT |
-RK |
| WIDE TEMP OPERATION -30 TO 65 C |
-WTO |
| RUGGEDIZED/MILITARIZED |
-MIL |
| PANEL MOUNT |
-PNL |
| BATTERY BACK UP |
-LVBD |
| EMI/RFI REDUCTION |
-EMI |
| 400HZ OPERATION |
-400 |
AVAILABLE OPTIONS :
- Hot Swap
- Ruggedized for shock and vibration
- Rack mount / Panel Mount
- Parallel operation
- Oring diode for redundant operation
- 400Hz Operation
- EMI/RFI Reduction
- Low Voltage Battery Disconnect for battery back up.
SAFETY AND EMMISIONS:
Designed to meet:
- UL/cUL60950-1
- TUV EN60950-1
- CB Report (IEC 60950-1)
- CE Mark (LVD)
- EN55022 Class B (CISPR 22 B)
|
|
SPECIFICATIONS:
ELECTRICAL:
INPUT SPECIFICATIONS
Input: Universal AC Input Range
100-264VAC / 127-370VDC
Input Frequency: 47-63Hz
Inrush Current: 30A max @115VAC/60A max 230VAC (cold start)
Input Current: 17A max @ 115VAC / 8A max@ 230VAC
Efficiency: 80-91% typical (depending on output model)
Hold-up time: 10-16ms at full load (minimum)
Leakage current: <2.0mA maximum @ 240VAC
Harmonics: EN 61000-3-2, -3 Class D Compliant (0.99PF Typical)
OUTPUT SPECIFICATIONS:
Adjustment Range: -5/+10% (minimum)
Minimum Load: none
Regulation: ±1% (except 5V=±2.5%) line, load and temperature.
Ripple/Noise: 150-200mV peak to peak maximum (20 Mhz)
Set Point Accuracy: ± 1% (except 5V = ± 2%) (maximum)
Output voltage adj: -5/+10% minimum
Overcurrent Protection: 105-135% automatic recovery
Overvoltage Protection: 115-150% of V1 nominal
MECHANICAL AND ENVIRONMENTAL:
Operating Temperature: -20°C to +50 °C
Storage Temperature: -40°C
to 85°C max
Cooling: Internal ball bearing
DC fan
Shock: 20G peak acceleration
Reliability: >62.6K hours minimum per MIL-HDBK-217F (25 °C)
Humidity: 20-90% RH non condensing
Size: 12.5" (L)
x 5" (W) x 5.4" (H)
Weight: 9.5 lb
|
|
|
|
