| |
|
|
AC -
DC POWER SUPPLIES
|
 |
SINGLE
OUTPUT, pOWER FACTOR CORRECTED
1000 WATTS
|
APPLICATIONS
The TD RSP-1000 series of Power Factor Corrected AC-DC power supplies provides highly regulated output power up to 1000 watts. Rugged construction and superior quality make this power supply ideal for harsh environment applications. Available in standard, modified or fully custom configurations, for industrial, commercial, COTS, ruggedized and Military applications.
STANDARD FEATURES:
|
|
|
|
 |
| |
|
• Universal AC Input / Full Range
|
|
• DC Good Signals |
| • Current Share Function |
• Remote ON/OFF & Remote Sense Functions
|
| • Built In DC Fan for Cooling |
• 5V / 0.5A Auxiliary Output |
| • Active PFC for EN61000-3-2 |
|
SINGLE
OUTPUT POWER SUPPLIES
| TD RSP-1000-12 |
12Volts |
60A |
| TD RSP-1000-15 |
15Volts |
50A |
TD RSP-1000-24 |
24Volts |
40A |
| TD RSP-1000-28 |
28Volts |
37 |
| TD RSP-1000-48 |
48Volts |
21 |
Note: Other voltages and currents available. Consult the factory.
| HOT SWAP |
-HSP |
| PARALLEL OPERATION |
-PAR |
| REDUNDANT OPERATION |
-ORD |
| RUGGEDIZED/MILITARIZED |
-MIL |
| RACK MOUNT |
-RK |
| PANEL MOUNT |
-PNL |
| CONFORMAL COATING |
-CC |
| 400 HZ OPERATION |
-4WHz |
AVAILABLE OPTIONS :
- Hot Swap
- Parallel operation
- ORing Diode for Redundant Operation
- Rack mount / Panel Mount
- Ruggedized for shock and vibration
- 400Hz Operation
- Conformal Coating
SAFETY AND EMMISIONS:
- Designed to meet UL/cUL60950-1
- Designed to meet TUV EN60950-1
- Designed to meet CB Report (IEC 60950-1)
- Designed to meet CE Mmark (LVD)
- Designed to meet EN55022 Class B (CISPR 22 B)
|
|
SPECIFICATIONS:
ELECTRICAL:
INPUT SPECIFICATIONS
Input: Universal AC Input Range 90-264VAC/127-370VDC
Input Frequency: 47-63Hz
Inrush Current: 25A max at 115VAC/40A at 230VAC (cold start)
Input Current: 12A max at 115VAC 6A max at 230VAC
Efficiency: 83-90% typical (depending on output model)
Hold-up time: 16ms at full load (minimum)
Leakage current: <2.0mA maximum @ 240VAC
Harmonics: EN 61000-3-2, -3 Class D Compliant (0.99PF Typical)
OUTPUT SPECIFICATIONS:
Adjustment Range: ±10% (minimum)
Minimum Load: none
Regulation: Line ± 0.5% Load ± 0.5%
Ripple/Noise: 150mV peak to peak maximum (20 Mhz)
Set Point Accuracy: ± 1% (except 5V = ± 2%) (maximum)
Output voltage adj: ± 10%
minimum
Overcurrent Protection: 105-125% automatic recovery cConstant current
Overvoltage Protection: 115-140% of V1 nominal
Overtemperature Protection: Heatsink Temp. 90°C ± 5°C Auto recovery
MECHANICAL AND ENVIRONMENTAL:
Operating Temperature:
-20°C to +50 °C. Derate to 50% at +70°C
Storage Temperature: -40°C
to +85°C max 95% Relative Humidity
Cooling: Internal ball bearing
DC fan
Humidity: 20-90% RH non condensing
Vibration: 10-500Hz, 2G 10min/1 cycle for 60 min (3 axes)
Shock: 20G Peak acceleration
Weight Approx.: 4 lb.
Size: 11.61"
x 5" x 1.61 |
|
|
|
