| |
|
|
AC -
DC POWER SUPPLIES
|
 |
SINGLE
OUTPUT, pOWER FACTOR CORRECTED
6000 WATTS
|
APPLICATIONS
The TD RSP-6000 series of Power Factor Corrected AC-DC power supplies provides highly regulated output power up to 6000 watts. Rugged construction and superior quality make this power supply ideal for harsh environment applications. Available in standard, modified or fully custom configurations, for industrial, commercial, COTS, ruggedized and Military applications.
STANDARD FEATURES:
|
|
|
|
 |
| |
|
• High efficiency up to 90%
|
|
• Current Share Function |
| • Active PFC for EN61000-3-2, -3 PF>0.95% |
• AC Good Signals
|
| • AC Input 180-264 VAC |
• Remote ON/OFF & Remote Sense Functions |
| • Built In DC Fan for Cooling |
|
SINGLE
OUTPUT POWER SUPPLIES
| TD RSP-6000-12 |
12Volts |
400A |
TD RSP-6000-24 |
24Volts |
250A |
| TD RSP-6000-48 |
48Volts |
124A |
Note: Other voltages and currents available. Consult the factory.
| HOT SWAP |
-HSP |
| PARALLEL OPERATION |
-PAR |
| REDUNDANT OPERATION |
-ORD |
| RUGGEDIZED/MILITARIZED |
-MIL |
| RACK MOUNT |
-RK |
| PANEL MOUNT |
-PNL |
| CONFORMAL COATING |
-CC |
| 400 HZ OPERATION |
-400Hz |
AVAILABLE OPTIONS:
- Hot Swap (Alternate Case Configuration)
- Parallel operation
- ORing Diode for Redundant Operation
- Rack Mount / Panel Mount
- Ruggedized for shock and vibration
- 400Hz Operation
- Conformal Coating
SAFETY AND EMMISIONS:
- Designed to meet UL/cUL60950-1
- Designed to meet TUV EN60950-1
- Designed to meet CB Report (IEC 60950-1)
- Designed to meet CE Mmark (LVD)
- Designed to meet EN55022 Class B (CISPR 22 B)
|
|
SPECIFICATIONS:
ELECTRICAL:
INPUT SPECIFICATIONS
Input: Universal AC Input Range 180-264VAC/254-370VDC
Input Frequency: 47-63Hz
Inrush Current: 60A at 230VAC (cold start)
Input Current: 40A max @ 16A/230VAC
Efficiency: 86-90% typical (depending on output model)
Hold-up time: 10ms at full load (minimum)
Leakage current: <2.0mA maximum @ 240VAC
Harmonics: EN 61000-3-2, -3 Class D Compliant (0.99PF Typical)
OUTPUT SPECIFICATIONS:
Adjustment Range: ±10% (minimum) (Factory Set)
Minimum Load: none
Regulation: Line ± 0.5% Load ± 0.5%
Ripple/Noise: 150-200mV peak to peak maximum (20 Mhz)
Set Point Accuracy: ± 1% (except 5V = ± 2%) (maximum)
Output voltage adj: ± 10%
minimum
Overcurrent Protection: 105-135% automatic recovery
Overvoltage Protection: 115-150% of V1 nominal
Overtemperature Protection: Heatsink Temp. 90°C ± 5°C Auto recovery
ENVIROMENTAL SPECIFICATIONS:
Operating Temperature:
-20°C to +50 °C. Derate to 50% at +70°C
Storage Temperature: -40°C
to +85°C max
Cooling: Internal ball bearing
DC fan
Humidity: 20-90% RH non condensing
Vibration: 10-500Hz, 2G 10min/1 cycle for 60 min (3 axes)
Shock: 20G Peak acceleration
Weight Approx.: 20 lb.
Size: 12.5"
x 8" x 5" |
|
|
|
